See What Ghost Immobiliser Problems Tricks The Celebs Are Making Use Of

Protect Your Pride And Joy With The ghost 2 immobiliser problems Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. It's discreet and does not require any additional key fobs to operate.

The device utilizes buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence up to 20 presses long. This then authorizes the vehicle to start.

Simple change of PIN code

Many homeowners are upgrading their security because of the increase in vehicle theft. There are a myriad of security products that are available from tracking systems to alarms and immobilisers. However, not all of them are equally effective at protecting your car. A tracking system can aid in finding your vehicle in the event of it being stolen however it cannot prevent the crime. Immobilisers, however are exactly what they say on the tin - they shut down the motor of your car to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to take your vehicle.

Using the existing buttons in your car, the ghost device creates an unique sequence that must be entered before the engine will start. This can be done using the indicator stalk windows or heater buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their car without the button sequence. This option is particularly useful when you need to give your car away for valet parking or maintenance, as the immobiliser is activated and not disabled.

The ghost immobiliser problems - her latest blog - is a truly unique and ingenious device that works in conjunction with buttons in your vehicle rather than as a separate unit. It's not just an effective deterrent to vehicle theft, but it can be used to secure any future vehicles you own. This makes it a more cost-effective option than a traditional wheel lock.

Weatherproof tiny device

The Autowatch Ghost Immobiliser is a sophisticated security system that safeguards your pride & joy from key hacking and cloning. It also blocks ECU swapping. It's a small, weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices which are a typical technique that car thieves use to bypass immobilisers.

The advantage of CAN data over traditional systems is that they work silently. It can't be detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by traditional diagnostic tools. The Autowatch ghost does not produce LEDs, but instead utilizes the buttons inside your vehicle like the steering wheel, centre console or door panels to create a unique, changeable disarm sequence. The sequence can be extended to up to 20 presses for additional security. The iPhone app allows a single, authorised connection using the pairing code unique to the ghost immobiliser for sale and communication between the two is secured.

The Ghost also prevents car thieves from using the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. The engine will only run when a valid PIN code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with set parameters such as 30mph speed limit) so that you can transfer your vehicle to a valet service for maintenance without having to enter a pin code.

Tested for each vehicle

The Autowatch ghost vehicle immobiliser is the first aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device detects signals to prevent your car from starting normally until you enter a custom code. The system can be turned off or on via your smartphone's app without the need for additional wires.

Standard factory immobilisers for automobiles function through a transponder inside the key, which sends an indication to the ECU. If the correct code is transmitted the car will start, but if a transponder is replaced with one from a different vehicle, the immobiliser will not recognise it. This makes it possible for the vehicle to be stolen and then started. The Ghost immobiliser has been developed by an South African company at the top of security systems for vehicles technology. It safeguards your vehicle from key cloning, hacking and even key theft. Only by physically towing your car away from thieves could they steal it and not be able to drive it.

Ghost makes use of buttons on your vehicle, like the indicator stalk, steering wheel, and the door panels, to create unique PIN codes that needs to be entered in order to use your car. This is not required to use extra hardware such as key fobs and can last up to 20 presses long. It is also inaccessible to equipment for diagnostics and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing technologies to detect that a system has been installed.

Unlike physical anti-theft devices like wheel locks or clamps, ghost immobiliser birmingham is covertly integrated into the vehicle, so it cannot be taken away or disabled by thieves. It is also harder to remove than a car alarm that requires disarming with the use of a button sequence. This makes it a perfect alternative to a GPS tracker that can assist in locating your car after it's been taken.

Emergency PIN code override

You don't have to go far on social media sites to find stories or even videos of vehicles that have been taken by car thieves using the latest technology tools available to them. This includes key-cloning devices and hacking devices that allow them to start your vehicle without the original keys.

Our Ghost immobiliser fights this and gives you an additional layer of security to stop your vehicle from being taken if it is targeted by thieves. It is created by creating an unique pin code push sequence using your buttons on the steering wheel, door panel, and the centre console. The unique pin code must be entered together with your original key fob to stop the vehicle from beginning. The unique override pin can be found on a black plastic card which you will receive following the installation. It is easy to remember because there aren't any LED indicators.

The device is hidden within the vehicle's wiring and does not emit radio signals. This means it can't be detected using diagnostic software that can tell the type of security system you have installed. This makes it a great alternative to an alarm.

Unlike other security systems, that rely on a relay located in the engine bays, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely through the use of a digital block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems but this must be stated prior to the installation of the device. They also work with service/valet modes and is a great alternative to a tracking device if you take your car to the dealer for an electrical issue.

Service/Valet Mode

In recent years there has been an increase in vehicles being stolen without the owners keys. With easy access to key cloning equipment & door lock pick sets it is now much easier for thieves to steal your pride and joy. We have developed the Autowatch Ghost Immobiliser to combat this. It stops your car from being driven, even if your keys have been copied.

It directly communicates with your car's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent since it doesn't use radio frequencies or keys fobs. It cannot be detected using diagnostics or any other hacking device. It also protects the user from using a new ECU or key to bypass the system since only the PIN code allows the engine to start.

The device is concealed inside your car using existing buttons on the steering wheel, centre console and door panels. Before you can begin your car, you must enter a unique, changeable PIN code that can be as long as 20 digits.

This is the first aftermarket CAN bus immobiliser to be created that will stop your car from being started or driven away if a PIN code isn't entered first. If the device is in armed and you attempt to drive off it will display an indicator on your dash, which will flash on a regular basis for approximately 300m, if you enter your PIN code at this point, it will disarm the anti-hijack device and your car will continue to drive in the normal way. If you do not enter your PIN code at this time the indication will keep flashing & will require another PIN code for every attempt to start your car.