Guide To Ghost Immobiliser Car: The Intermediate Guide Towards Ghost Immobiliser Car

BMW Ghost Immobiliser

The Ghost utilizes the CAN data bus for communication with your vehicle. This prevents thieves from adding a new key or even replacing the ECU to bypass your security system since it requires a correct PIN code to start the engine.

In contrast to other immobilisers, The Ghost is different from other immobilisers. Ghost does not use LEDs or key fobs. Instead it uses your vehicle's existing buttons to allow you to select a unique disarm sequence that only you know.

Stop & Start

If you've ever driven a BMW or utilized its stop-start feature, you might have noticed that the engine continues to run for a period of 30 seconds after you have released the brake pedal. The BMW engine management system continues to monitor the vehicle for a signal that comes from the ignition key. If it detects this, the vehicle will continue to run. The autowatch ghost 2 immobiliser 2 Ghost immobiliser prevents this from happening by stopping the car whenever you press a button.

Our BMW ghost immobiliser is a revolutionary next-generation device that doesn't require cutting OEM wires or adding aftermarket alarms and key fobs. It is connected to the BMW CAN data network, and is programmed with a unique PIN code that is accessible via buttons in your car. This allows you to enter an exact key-push sequence that isn't found in the normal menus for media, like volume up/down or cruise control, source or air conditioning on and stops your car from starting unless the sequence is entered. The PIN can range between 4 and 20 numbers which makes it extremely difficult for thieves to determine or break.

In addition, we can also add a service/ valet mode to the system, this is activated when the car is in for servicing to ensure that the Ghost is not visible to the garage. This can be accomplished by pressing the service button on your infotainment system five times (the system will flash to confirm this) and when you return the Ghost will automatically re-arm.

With luxury vehicles being more targeted than ever we strongly recommend the Ghost immobiliser to be installed. It is completely unnoticeable and does not require cutting any original wiring from the factory and will disable the engine of your vehicle when an incorrect pin code is entered. It's a simple, but effective way to prevent your car from being taken - even with cloned key. Take a look at social media accounts to see how quickly new vehicles can be stolen using tools for cloning that are available on the internet for less than PS80.

Service Mode / Valet Mode

The Ghost is a market-leading immobiliser designed to stop your vehicle from being taken by key cloning or hacking. It makes use of the factory buttons of your vehicle to create an individual push sequence that only you can identify. It is similar to pin code security for your mobile phone. It's subtle and extremely effective and deterring even the most determined thieves from ever trying!

If you're parked at your home or in a meeting and greet situation, the Ghost can be set to service mode. This lets you start the vehicle using your keys, but it stops the engine from restarting until the correct code has been entered. This is ideal for those who have to hand their cars over to valet businesses or other trusted friends and family members. This lets you bring your vehicle to the garage for maintenance, or other maintenance. without worrying that it will be tampered with by mechanics while you are waiting.

Once the service/valet mode is enabled, your BMW is unable to drive once it is started. This will stop anyone else from testing driving it while you are away. After you return, it will return to normal, preventing your vehicle from being damaged or stolen again.

We can fit the Ghost to any BMW All you need is the right keys as the device does not use the original remotes and can be used in conjunction with them. We are TASSA registered, DBS-security screened and fully trained in system installation. You can be sure that the installation will be completed correctly and your Ghost device will work exactly as it was intended. Your car will also be registered on a database, and you will receive a document that you can provide to your insurance company, they are awestruck by these devices and often receive substantial discounts as a result!

We can also supply an optional Bluetooth tag which can be used to deactivate the Ghost through an app for your smartphone (IOS & Android) or in case you don't have a phone or aren't comfortable using it, simply press the emergency card once. This is an additional expense and requires a different Bluetooth pairing.

Anti-Hijack

ghost autowatch immobiliser developed this discreet device that is unobtrusive and helps in battling the growing sophistication of hi-tech thieves. It's designed to stop thieves from adding a new key or replacing the ECU in order to start your vehicle and then drive it away. Ghost connects to your CAN data network, and utilizes the buttons in your vehicle (steering wheel and centre console, as well as door panels) to create an individual push sequence that requires to be entered before the engine can be started.

This will activate the anti-hijack mode and once active any attempt to start the engine will be stopped. Once the system detects that the vehicle has stopped moving it will honk the horn and flash the indicators. If it is unable to find the correct code it will also stop the engine (where it is). By entering your push sequence or entering service mode, you can disable the Anti-Hijack feature. This allows your vehicle to temporarily start without the need to enter a PIN.

If you have an GPS device connected to your BMW it could be used to turn off the Anti-Hijack feature, so you can still use the navigation system inside your car even when the vehicle is parked and unattended. If you own a smart-phone, you can also hook it to your ghost immobiliser problems app to control the anti-hijack function and other functions.

This is a Tassa verified product and is recognized by the majority of insurance companies. It can help reduce the chance of your prized possessions being stolen. It is completely discrete and will not interfere with your vehicle's functionality. It doesn't require any programming expertise to install or use. It is totally undetectable to the diagnostic tools used by thieves and is immune to key cloning, as it is connected to your vehicle's CAN data network.

Remote Control

We can connect your Ghost device to your mobile application for remote control of keyless go and start functionality. This is useful when you need to be somewhere other than home and valet or mechanic needs to start your vehicle. The system lets you start the vehicle, select drive and leave the service mode without using your key fobs. You can also see your vehicle's location in real-time on a map using your smartphone, which is ideal for tracking your car whilst on the move.

The Ghost can be fitted under the dashboard or in the centre console, it is completely concealed and tamperproof and does not require any additional wiring. The device is connected to the vehicle's CAN Data Network (similar to an Ethernet cable) and a personal PIN code is inserted into it. This pin code has to be selected prior to the engine's start. This stops thieves from using a copied key or replacing the ECU to disable this system.

If the vehicle is stolen, the Ghost will enter a security mode and shut down all functions unless the PIN code is entered, or you make use of the mobile app to disable it. This feature was created to safeguard your vehicle from thieves using high-tech devices who use relay boxes to steal it. It will even stop the thieves from being able to use their mobile phone to turn on your sat nav system or mp3 player to locate your car!

Ghost can also stop "Relay Style Frequency Amplification". This is the most frequent method of stealing a vehicle using a keyfob that's duplicated or stolen through hacking. ghost immobiliser car allows you to prevent this theft by installing a device called Secure-A Key inside your vehicle. The device is installed inside the key-fob of your vehicle and then disconnects the battery after a few minutes of inactivity, this can be done on the majority of modern PKE key-fobs.

We are TASSA accredited (Tracking And Aftermarket Security Systems Association) A recognized body that insurance companies recognise and offer discounts for fitting the device. We are also DBS security screened and fully system trained to install the ghost immobiliser and tracker to ensure that the installation is completed to the highest standard. After installation, you will receive documentation to present to your insurance company as proof of installation and allowing you to receive the best deal possible on your car insurance.