See What Ghost Immobiliser Problems Tricks The Celebs Are Using

Protect Your Pride And Joy With The ghost immobiliser tracker Immobiliser

Ghost Immobiliser will safeguard your valuable possession from theft. It is discreet and does not require any additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin sequence that can be changed up to 20 times. This will allow your vehicle to begin.

Simple change of PIN code

With the growing rate of vehicle theft, a lot of owners are seeking to improve their security. There are many different types of aftermarket security devices that range from tracking systems to alarms and immobilisers. However, not all of them are equally effective at protecting your vehicle. A tracking system may help you locate your vehicle if it's stolen however, it won't prevent the crime. An immobiliser, on the contrary is exactly what says on the label: it shuts off the engine of your vehicle to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves steal your car.

The ghost device utilizes the buttons on your car to generate a unique sequence that must be entered in order for the engine to begin. This can be done via the indicator stalk or window buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their car without the need to use the button sequence. This is especially useful when you need to surrender your car for valet parking or servicing since the immobiliser is activated, but not disabled.

The Ghost is a truly unique and ingenious device that works in conjunction with the buttons on your vehicle instead of being a separate unit. This means that it's not just a powerful deterrent against vehicle theft but can also be transferred over to any future cars you have, making it more of an investment than a traditional steering wheel lock.

Weatherproof small device

The Autowatch Ghost Immobiliser is a high-tech security system that protects your car from key cloning and hacking. It also prevents ECU swapping. It is a small, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be installed in the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices, which are a common method used by car thieves to circumvent immobilisers.

The advantage of CAN data over traditional systems is that they work silently. It can't be detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by traditional diagnostic tools. The Autowatch ghost 2 immobiliser near me does not use LED indicators, but instead uses buttons in your vehicle, like the steering wheel, centre console or doors, to create a unique disarming sequence. This sequence can be extended to up to 20 presses for extra security. The iPhone app allows only one connection, with a unique pairing code for the Ghost. All communication between the two devices is secured.

The ghost immobilisers also prevents car thieves from using an additional key or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only run only if a valid PIN is entered. It is possible to operate temporarily in valet or service mode (with the appropriate parameters, like 30mph speed limit), so you can give your car to a valet or service without needing to enter an entry code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device intercepts electronic signals to disable your car's system from running its normal initialization process until you enter the passcode you have created. The system can be turned off or on by using your smartphone app, without the need for extra wires.

Standard factory immobilisers on vehicles function by using a transponder inside the key, which sends a signal to the ECU. If the correct code is sent the car will start however if the transponder is swapped with one from another vehicle the immobiliser won't recognize it. This allows the vehicle to be stolen and then started. The Ghost immobiliser was created by a South African company at the forefront of vehicle security systems technology. It protects your car from key cloning, hacking and even key theft. The only way that a burglar could take your car is by physically towing it away and even then they wouldn't be allowed to drive it.

Ghost utilizes the buttons of your vehicle including the indicator stalk, steering wheel and door panels to generate an unique PIN sequence that can be changed that must be entered prior to you can use your car. This is done without extra hardware, such as keys fobs. It can take up 20 to 20 presses. It is also unrecognizable to diagnostic equipment and doesn't transmit radio frequency signals, which means thieves are unable to use sophisticated RF scanning or code grabbing technology to determine if security systems have been installed.

Ghost is more difficult to remove than car alarms that require disarming using the buttons. This makes it a perfect supplement to a GPS tracker that can assist in locating your car after it's been stolen.

Override of emergency PIN code

You don't have to look too far on social media sites to find stories or even videos of vehicles that have been taken by thieves using the latest technology tools available to them. This includes key-cloning devices and hacking devices that allow you to start your car without your original key fobs.

Our Ghost immobiliser is designed to combat this and offer an additional layer of security in order to prevent your vehicle from being targeted by thieves. It creates a unique pin code push sequence using your buttons on the steering wheel, door panel, and the centre console. This unique PIN must be entered in conjunction with your original key fob to stop the vehicle from getting started. The unique override pin can be found on a black card that you receive following your installation. It is easy to remember since there are no LED indicators.

The device is hidden inside the vehicle's wiring and doesn't emit any radio signals, therefore it can't be recognized by criminals using diagnostic software that is able to detect the type of security system you have installed. This makes it a great alternative to a tracking device.

Unlike most other security systems that use a relay inside the engine bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via CAN data bus (brand dependent). This allows them to disable the vehicle completely by sending an electronic block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm or tracker with these systems, however this must be specified prior to installing the device. They also work with valet and service modes, and are an excellent alternative to a tracker device when you bring your vehicle to the dealer for an electrical problem.

Service/Valet mode

In recent years there has seen an increase in the number of cars being stolen with the owners' keys. It is more easy than ever to take your joy and pride thanks to the availability of key cloning tools & door lock picks. To stop this, we have launched the Autowatch ghost immobiliser problems (My Page) immobiliser that prevents your vehicle from being driven despite the fact that your keys have been copied or your car has been hijacked.

It directly communicates with your cars ECU (Engine Control Unit) through the CAN data circuit. It is completely silent, since it doesn't use radio frequencies or key fobs. This means that it can't be detected by diagnostics or other vehicle hacking devices. It also protects you from adding an ECU or key to bypass the system, because only the PIN number allows the engine to start.

The device is hidden in your car and can be accessible via buttons on your steering wheel, centre console and door panels. Before you can start your vehicle, you must enter a unique and reversible PIN code up to 20 digits.

This is the first aftermarket immobiliser for CAN bus to be developed that can prevent your car being started or driven away without a PIN code being entered before. If the device is in armed and you attempt to drive off it will display a warning on your dash which will flash regularly for around 300m, if you enter your PIN code at this point it will disarm the anti-hijack and your car will continue to operate in the normal way. If you don't enter your PIN at this time the indicator will continue to flash and will require a new PIN code every time you attempt to start your vehicle.