See What Ghost Immobiliser Problems Tricks The Celebs Are Using

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized property from theft. It's discreet and does not require any additional key fobs to operate.

The device makes use of buttons on your vehicle (steering wheels doors, door panels, and the centre console) to create a unique pin code sequence that can be altered up to 20 times. This will allow your vehicle to begin.

Simple change of PIN code

Many homeowners are upgrading their security because of the increase in vehicle theft. There are a variety of security products that are available including tracking systems, alarms and immobilisers. Not all of them are equally effective in protecting your car. While a tracking system may help you find your vehicle in the event of theft, it can not stop the crime from occurring in the first in the first place. An immobiliser, on other hand does exactly what it says on the label: it shuts off the engine of your vehicle so that it cannot be started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves steal your car.

The ghost device makes use of the buttons on your car to generate a unique sequence that must be entered to allow the engine to start. This can be accomplished using the indicator stalk or window buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the button sequence. This is especially useful if you need to give your car immobiliser ghost away to a valet service or parking, as the immobiliser is active and not deactivated.

The Ghost is an unique and innovative device that works by using your vehicle's buttons rather than as a standalone device. This means it's not just a powerful security measure against theft from your vehicle but can also be transferred onto any other vehicles you own, making it more investment-wise than traditional steering wheel locks.

Small, weatherproof device

The Autowatch ghost 2 immobiliser review Immobiliser is a high-tech security device that shields your vehicle from key hacking and cloning. It also blocks ECU swapping. It is a weatherproof tiny device that communicates directly with your vehicle's ECU over the CAN data bus to shut down the engine. It can be plugged into the vehicle without the need for additional wiring, and has been thoroughly tested to ensure that it is compatible with all vehicles. It is also resistant to jamming devices that are a common technique used by thieves to get around the immobilisers in place.

The advantage of using CAN data is that it operates in a silent manner in comparison to conventional systems. It isn't detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators, but instead uses buttons on your vehicle, such as the steering wheel, centre console, or door panels, to create a unique disarming sequence. You can even create a sequence that is up to 20 presses long for added security. The iPhone app allows only one connection, using a unique pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU to bypass the immobiliser. The engine can only be started if a valid PIN code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can transfer your vehicle to a valet service or to be serviced without needing to enter a PIN.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that connects to your vehicle's existing wiring and connects to your engine control unit (ECU). The device snoops on electronic signals to disable the system of your vehicle from running its normal start-up routine until you input an individual passcode. The system can be turned off or on via your smartphone's app, without the need for extra wires.

The standard factory immobilisers function by using a transponder, which is integrated into the key. This sends a message to the ECU. The car will begin to start if the correct code is sent. If, however, the transponder of a different vehicle is used instead, the immobiliser won't recognise it. This makes it possible for the vehicle to be started and stolen. A South African company that is at the forefront of vehicle safety systems technology created the Ghost 2 immobiliser immobiliser. It protects you from key cloning or hacking, and even key theft. Only by physically towing your vehicle away could a thief take it away and not be able to drive the vehicle.

ghost immobiliser 2 makes use of buttons on your vehicle, like the indicator stalk, steering wheel, as well as the door panels, to create unique PIN codes that needs to be entered in order to use your car. This is not required to use additional hardware, such as keys-fobs, and can be as long as 20 presses long. It is also inaccessible to diagnostics equipment and does not transmit radio frequency signals so thieves cannot use sophisticated RF scanning or code-grabbing technology to determine if the security system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is covertly integrated into the vehicle to ensure that it can't be taken away or disabled by thieves. It's more difficult to remove from a car alarm which requires disarming with an action sequence. This makes it a great complement to a GPS tracker that can assist in locating your car after it has been taken.

Override of emergency PIN code

You don't have to look very far on social media for stories or videos of vehicles that have been stolen using the latest technology tools. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle with the original keys.

The Ghost immobiliser was specifically designed to prevent this and provide you with an additional layer of security in order to prevent your vehicle from being targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel, and the centre console. This unique PIN must be entered in conjunction with your original key fob in order to prevent the vehicle from starting. The unique override PIN can be found on the black card you will receive following your installation. It is simple to remember because there aren't any LEDs.

The device is hidden in the vehicle's wires and doesn't emit any radio signals, so it can't be detected by modern thieves using diagnostic software that is able to detect the type of security system you have installed. This makes it a fantastic alternative to the tracking device.

Contrary to other security systems which rely on a relay in the engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable a vehicle completely, by sending a digital block to the ECU and engine.

They can also be connected to a separate alarm immobiliser or tracker. This should be specified prior to the installation. They are also compatible with valet/service modes and an excellent alternative to a tracking device if you take your car into the dealer to address an electrical problem.

Service/Valet mode

In recent years, there has been a increase in the number of vehicles that are stolen without owners' keys. With the ease of access to key cloning equipment & door lock pick sets, it is now much easier for thieves to steal your pride and joy. We have developed the Autowatch ghost immobiliser problems (visit site) Immobiliser to combat this. It blocks your car from being driven, even if your keys have been copied.

It communicates directly with your car's ECU (Engine Control Unit), via the data loop called CAN. It is completely silent, as it does not use radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also prevents the addition of the key to a new one or replacing the ECU to bypass the system, since only the correct PIN code can allow the engine to start.

The device is hidden within your car using existing buttons on the steering wheel, centre console & door panels. A unique and reversible PIN code sequence up to 20 digits needs to be entered before you are able to start your vehicle.

This is the very first aftermarket CAN-bus immobiliser that is being developed. It will stop your vehicle from being driven or even started in the event that you do not enter a PIN number first. If the device is in armed and you try to drive off it will display a warning on your dash that will flash regularly for around 300m. If you type in your PIN code at this point, it will disarm the anti-hijack device and your car will continue to operate just as normal. If you do not enter your PIN code at this point, the warning will keep flashing & will require a new PIN code every attempt to start your car.