See What Ghost Immobiliser Problems Tricks The Celebs Are Using

Protect Your Pride And Joy With The ghost immobiliser reviews Immobiliser

Ghost Immobiliser can safeguard your prized property from theft. It's discreet and does not require additional key fobs.

The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence of up to 20 presses. This will then allow the vehicle to start.

Simple PIN code Change Process

With the increasing rate of vehicle thefts, many owners are looking to upgrade their security. There are a variety of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However, not all of them are equally effective in protecting your vehicle. While a tracking device can assist you in locating your car in the case of theft, it can not prevent the crime from occurring in the first instance. Immobilisers, on the contrary perform exactly as they say on the label - they shut down the motor of your car to prevent it from being started. The Autowatch ghost Immobiliser Problems (postheaven.Net) immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to steal your vehicle.

Utilizing the buttons already in your car The ghost device generates a unique sequence which must be entered prior to the engine starts. This can be done by using the window, heater or indicator stalk buttons. In addition to this option, there is an app for mobile devices that acts as an emergency PIN code override and allows the driver to operate the car without using the button sequence. This is an excellent option for those who want to offer your car to valet parking or for maintenance. The immobiliser will stay in operation.

The Ghost is a truly unique and innovative device that works in conjunction with buttons in your vehicle instead of being a separate unit. It is not only an effective deterrent to vehicle theft, but it can also be used on any future vehicles you may own. This makes it a much better investment than a traditional wheel lock.

Weatherproof small device

The Autowatch Ghost Immobiliser is a sophisticated security system that safeguards your car from key cloning and hacking. It also prevents ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without the need for additional wiring and has been extensively tested to ensure it is compatible with all vehicles. It is also immune to jamming devices, which are a common technique used by thieves to get around immobilisers.

The benefit of CAN data over conventional systems is that they work silently. It isn't detected by sophisticated RF scanning and code-grabbing technologies as well as identified by conventional diagnostic tools. The Autowatch ghost immobilisers doesn't produce LEDs, but instead utilizes the buttons inside your vehicle such as steering wheel or centre console panels to create a unique, customizable disarm sequence. This sequence can be extended to up to 20 presses for additional security. The iPhone app only allows one connection, with a unique pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost also prevents car thieves from adding a new key or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to run only if the correct pin code is entered. It is able to be operated temporarily in Valet/Service mode (with parameters set, such as a 30mph speed limit) and, therefore, you can give your car to an attendant or valet without entering a code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device intercepts signals to stop your car from operating normally until you enter a specific code. The system can be activated or deactivated via your smartphone's app without the need for additional wires.

The standard factory immobilisers work by using a transponder, which is built into the key. It transmits a message to the ECU. If the correct code is sent the car will begin however, if the transponder is replaced with one from a different vehicle, the immobiliser cannot recognize it. This enables the vehicle to be stolen and started. The Ghost immobiliser was developed by an South African company at the forefront of vehicle security systems technology. It shields your car from key cloning, hacking and even key theft. The only way a thief could take your car is physically towing it away and even then they wouldn't be capable of driving it.

ghost immobiliser 2 makes use of the buttons on your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to create a unique PIN code that is changeable that must be entered before you can drive. This is done without the need for additional hardware, such as a key-fob and can last up to 20 presses long. It is also undetectable to diagnostic equipment and doesn't transmit radio frequency signals, which means thieves are not able to use sophisticated RF scanning or code grabbing techniques to discover that a security system has been installed.

Ghost is more difficult to remove than car alarms, which require disarming with the buttons. This makes it an excellent supplement to a GPS tracker that can assist in locating your vehicle after it has been taken.

Override of emergency PIN code

You don't have to look too far on social media to see stories or even videos of vehicles that were stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking devices that allow the vehicle to start without the original keys.

Our Ghost immobiliser is designed to combat this and provide you with an additional layer of security to prevent your vehicle from being targeted by thieves. It works by creating an individual pin code sequence that is triggered by your existing buttons on the steering wheel, door panel and the centre console. The unique pin code is entered in conjunction with your original key fob in order to stop the engine from getting started. The unique override pin can be found on a black card that you receive following the installation. It is easy to remember because there aren't any LED indicators.

The device is hidden in the vehicle's wires and does not emit radio signals, which means it can't be identified by modern thieves with diagnostic software that can recognise what type of security system you have installed. This makes it an excellent alternative to an electronic device for tracking.

In contrast to other security systems, which have a relay in the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependent). This allows them to disable the vehicle completely with a digital block of commands to both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker to these systems but this must be specified prior to installing the device. They are also compatible with valet and service modes, and are an excellent alternative to a tracker device when you take your car into the dealer for an electrical problem.

Service/Valet Mode

In recent times there has been a rise in the number of vehicles being stolen with no owner's keys. It is easier than ever to take your joy and pride due to the availability of key cloning tools & door lock picks. We've developed the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if your keys have been cloned.

It connects directly to your car's ECU (Engine Control Unit), via the CAN data loop. It's completely silent since it doesn't use radio frequencies or keys fobs. It isn't detected by diagnostics or any other hacking device. It also protects the user from using a new ECU or key to circumvent the system, because only the PIN number allows the engine to start.

The device is hidden in your car and can be accessible via buttons on your steering wheel, center console and door panels. A unique and changeable PIN code sequence that can be as long as 20 digits has to be entered prior to being able to start your car.

This is the very first aftermarket CAN bus immobiliser that is being designed. It can prevent your vehicle from being driven or started if you don't enter a PIN code before entering. If you are driving away with the device arming, an indicator will appear on your dashboard and flash continuously for approximately 300m. Entering your PIN code will deactivate the anti-hijack. Your vehicle will continue to operate just as normal. If you don't enter your PIN at this time, the indicator will continue to flash and will require a new pin code each time you attempt to start your car.