See What Ghost Immobiliser Problems Tricks The Celebs Are Using

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost immobiliser Problems Immobiliser will protect your prized property from theft. This system is discrete and doesn't require additional key fobs.

The device utilizes buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence up to 20 presses. This will then allow the vehicle to start.

Simple PIN code Change Process

Many homeowners are upgrading their security because of the increase in vehicle theft. There are a myriad of security devices that are sold aftermarket from tracking systems to immobilisers and alarms. However, not all of them are equally effective in protecting your car. While a tracking device can assist in finding your vehicle in the case of theft, it can not prevent the crime from occurring in the first place. An immobiliser, on the other hand does exactly what it says on the tin: it disables your car's engine so that it cannot be started. The Autowatch ghost immobiliser problems immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to take your car.

The ghost device makes use of the buttons on your car to create a unique sequence that must be entered in order for the engine to start. This can be done using the indicator stalk windows or heater buttons. In addition to this it is possible to use a mobile app which acts as an emergency PIN code override and allows the driver to operate the car without the button sequence. This feature is particularly useful when you need to hand your car over for valet parking or servicing since the immobiliser will remain active and not deactivated.

The ghost immobiliser reviews is an unique and innovative device that works by using your vehicle's buttons rather than as a standalone unit. It is not only an effective deterrent to vehicle theft however, it can also be used on any future vehicles you own. This makes it a far better investment than a conventional wheel lock.

Weatherproof, tiny device

The Autowatch ghost immobiliser is a sophisticated security system that protects your car from key cloning, hacking & ECU swapping. It's a small weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus to stop the motor. It can be installed in the vehicle without the need for extra wiring and has been extensively tested to make sure it is compatible with all vehicles. It also is resistant to jamming devices, which are a common technique used by thieves to circumvent immobilisers.

The benefit of using CAN data is that it runs silently when compared to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technologies as well as identified by conventional diagnostic tools. The Autowatch ghost immobilise does not produce LEDs, but instead utilizes the buttons on your vehicle such as steering wheel or centre console panels to create a unique, customizable disarm sequence. You can even make this sequence up to 20 presses long to provide additional security. The iPhone app permits a single, authorised connection with the pairing code unique to the Ghost and the communication between the two is secured.

The Ghost prevents car ghost immobiliser thieves adding an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine will only run only if a valid PIN has been entered. It is also possible to put it in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to give your car to a valet service or for servicing without the need to enter a pin code.

Every vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects signals to prevent your car from starting normally until you enter a custom code. The system can be turned off or on via your smartphone's app without the need for additional wires.

Standard factory immobilisers in vehicles work by having a transponder inside the key that sends an indication to the ECU. The car will start when the correct code is sent. However, if the transponder from a different vehicle is used instead, the immobiliser doesn't recognise it. This allows the vehicle to be started and stolen. The Ghost immobiliser was created by an South African company at the top of security systems for vehicles technology. It protects your pride and joy from hacking, key cloning and even key theft. Only by physically towing your vehicle away could a thief get it, and they would still not be able drive it.

Ghost uses buttons on your vehicle, like the indicator stalk, the steering wheel, and doors, to generate an individual PIN code that needs to be entered in order to use your car. This is not required to use additional hardware, such as key fobs and can be as long as 20 presses long. It is also undetectable to diagnostic equipment and doesn't transmit radio frequency signals, which means thieves are not able to use sophisticated RF scanning or code grabbing techniques to determine if the security system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks, Ghost is hidden within the vehicle, so it cannot be disabled or removed by thieves and is even more difficult to get rid of than a car alarm that requires disarming using the use of a button sequence. This makes it an excellent alternative to a GPS tracker that can assist in locating your car after it's been stolen.

Emergency PIN code override

You don't have to go far on social media to find stories or even videos of vehicles that were stolen by thieves using the most advanced technology tools available to them. This includes key-cloning and hacking devices that allow them to start your vehicle without the original keys.

The Ghost immobiliser helps combat this issue and offers an additional layer of security to prevent your vehicle from being taken in the event of being targeted by thieves. It creates a unique pin code push sequence using your buttons on the steering wheel, door panel and the centre console. This unique PIN has to be entered together with your original key fob to stop the vehicle from beginning. The unique override pin is found on a black plastic card that you will receive after the installation. It is simple to remember since there are no LED indicators.

The device is hidden within the wiring of your vehicle and does not emit radio signals. This means it can't be detected using diagnostic software that can determine the security system you have installed. This makes it an excellent alternative to an alarm.

In contrast to other security systems which use a relay in engine bays, immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This enables them to shut down the vehicle completely by sending the use of a digital block of commands that is sent to both the ECU and the engine.

They can also be linked to an analog alarm immobiliser or tracker. This should be specified prior to installation. They also work with valet/service modes and an excellent alternative to a tracking device if you take your car to the dealer for repairs to an electrical issue.

Service/Valet Mode

In recent years there has been an increase in vehicles being stolen with the owners' keys. With the ease of access to key cloning tools and door lock pick sets, it is now much easier for thieves to steal your pride and joy. We have created the Autowatch ghost immobiliser review Immobiliser to combat this. It blocks your car from being driven, even if your keys have been copied.

It connects directly to your cars ECU (Engine Control Unit) via the CAN data circuit. It is completely silent as it does not use radio frequencies or key fobs. This means it cannot be detected by diagnostics or other car hacking devices. It also prevents the addition of a new key or replacing the ECU to get around the system, since only the correct PIN code can allow the engine to start.

The device is hidden within your car, using buttons on the steering wheel, the centre console and door panels. A unique & changeable PIN code sequence of up to 20 digits needs to be entered prior to being able to start your car.

This is the very first aftermarket CAN-bus immobiliser for the market that was created. It will prevent your vehicle from being driven or even started in the event that you do not enter a PIN code first. If you're driving away with the device in motion, an indicator will appear on your dashboard and flash continuously for around 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to run just as normal. If you don't enter your PIN code at this point, the indicator will continue to flash and will require a new PIN code every attempt to start your car.